OutlawSteve
Member
ok so I have a 2004 whippled cobra donor car that I'm swapping into a 1990 gt foxbody.
so far what ive gathered is this:
1- i have a new team z swap k member with tubular control arms and strange coil-overs.
this will be a track only car so no a/c or heat will be needed. i will use the hydroboost setup, can i just swap over the 04 cobra brakes spindles and rotors right over???
2- I'm going to swap the 04 tank into the foxbody. i hear you need to adapt the filler neck and that's it, correct?
3-i planned on using the 04 steering column and gauge cluster but retain the stock foxbody dash. i think all i have to do is use the steering bearing from the 04??
4=WIRING?? i have the entire harness from o4, if I'm not using a/c or heat or radio what will i have to adapt for brake lights and head lights?? I'm assuming the bulbs,connectors are different.
5= I'm assuming i don't need to disable anything as far as the pats system goes due to the fact that I'm keeping the cluster,column, and computer married together.
6=i know i need to remove the sway bar brackets or re-locate, any other things i need to do?
7=brakes question again?? should i just swap all the 04 brakes over to the foxbody lines and all with the 04 a.b.s pump??? any advise or things i need to know would be appreciated.
so far what ive gathered is this:
1- i have a new team z swap k member with tubular control arms and strange coil-overs.
this will be a track only car so no a/c or heat will be needed. i will use the hydroboost setup, can i just swap over the 04 cobra brakes spindles and rotors right over???
2- I'm going to swap the 04 tank into the foxbody. i hear you need to adapt the filler neck and that's it, correct?
3-i planned on using the 04 steering column and gauge cluster but retain the stock foxbody dash. i think all i have to do is use the steering bearing from the 04??
4=WIRING?? i have the entire harness from o4, if I'm not using a/c or heat or radio what will i have to adapt for brake lights and head lights?? I'm assuming the bulbs,connectors are different.
5= I'm assuming i don't need to disable anything as far as the pats system goes due to the fact that I'm keeping the cluster,column, and computer married together.
6=i know i need to remove the sway bar brackets or re-locate, any other things i need to do?
7=brakes question again?? should i just swap all the 04 brakes over to the foxbody lines and all with the 04 a.b.s pump??? any advise or things i need to know would be appreciated.