Another F100 mod swap

[jaa55]

My dad had recently purchased a aluminum headed 390 paired with a t56 and 4 link. I loved the truck so much I decided to build my own version.

Started out as a 68 harbour blue SWB truck, 352 FE

Then I bought this for a donor, 2006 CVPI

Next I got an epic deal on a super low mileage 3v 4.6

 

[jaa55]

Then the truck turned green, found an even better cab

Wiring mess

First drive, no mufflers needs tuned but it runs and the drive by wire works so I'm happy

 

[Bill]

That's a nice toy.

 

[DOHCfoxLX]

Another one of my dream builds

 

[jaa55]

Still needs more wire cleaning up and everything is covered in dust now. But exhaust is built and on. Sounds great

 

[Sittinlow88]

I have a 71' F100 and a 99' 2V 4.6 ready to go. Can you please give me some more info on your wiring and PATS disable? I have the complete donor vehicle so I can grab anything needed, I wish to keep the engine management as simple as possible and elementary as much wiring as I can. Anything you can pass along would be greatly appreciated!

 

[jaa55]

The 06' P71 computer I used does not have PATS. Although when I did my fox mod swap i used a 96 GT computer with PATS, and I had it disabled it in the tune. Wiring is simple coming out of the truck. Basically a couple 12v into the cab and a switched ignition 12v coming back out that you will use to trip your ECM relay. Tons of things can be eliminated. I suggest in investing in a wiring schematic from all diy data

 

[Sittinlow88]

Thank you.
I have talked with Eric Brooks of Brooks speed in Orlando, he makes custom tunes sent via email for the SCT tuners for $200. I need to find an SCT now

 

[hipoman]

Too cool!