• Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Hi new on here

hydro

hydro

Member
Hello I am going to be doing a Mark VIII swap into a 93 coupe any help with wiring , mounts and anything else needed to complete the swap would be great Thanks ^^
 
Bill

Bill

Well-Known Member
Staff member
Donator
Welcome to the board. You are in the right place. All the information you are looking for is likely covered several time here in the forums. Tell us a bit more about your swap? Are you using a donor Mark VIII? What are your plans for the car? Let us know if you have a hard time finding something. You'll find extensive discussions on Kmembers, wiring, etc. just by using the search feature, but if something is hiding let us know.
 
hydro

hydro

Member
yes a 97 donor Mark VIII motor going to use cobra internals maybe dif pistons want to go twin turbo or big single don't know what trans to use yet reading up on them
 
Bill

Bill

Well-Known Member
Staff member
Donator
Sounds like a fun project. This will tell you about the science of the modular piston: http://www.modularfoxmustangs.com/community/threads/the-science-behind-modular-pistons.1532/
This will give you a discussion about some of the pistons available as well as some pictures:
http://www.modularfoxmustangs.com/community/threads/teksid-2v-tech-article-must-read.821/
There are several builds on here that are set up for turbo. Maximum motorsports makes a Kmember that they developed specifically for the Hellion turbo. AJE is one of our site sponsors. I think if you call them and tell them what you plan to build, they can also recommend a good kmember out of their line.
 
You must log in or register to reply here.
Top