Installation of the MK93 Detail Zone Wiring Kit

[modularf]

Ok, we began the wiring up the car and would like to say that the this kit from The Detail Zone is awesome.
It beats trying to figure out all the wiring from this rats nest..


There are 23 individually wraped bags labeled from Bag #64 - Bag #83


The kit is so detailed that it can be installed by a non mechically incline person. Each individually wrapped bag comes with all connectors attached and all you have to do his connect it were it tell you and then to the TELORVEK Panel. (TELORVEK Panel image below)



Pictures of the Injectors connectors and TPS Sensor wired up.


Below is an example from the instruction booklet that comes with the kit.
[EXAMPLE: Bag #62 IGNITION CONTROL MODULE CONNECTION: The ICM requires some of the wires to be shilded from any electrical interference, that is why six of the wires in the connector are wrapped]


We found a location for the ICM and run all the wires



I will post more pics once completed...

 

[lsvtech918]

I've been debating on this kit. Cant wait to see when finished with all the pics!

 

[lsvtech918]

What all does this kit hook up to??

 

[modularf]

[quote author=lsvtech918 link=topic=215.msg400#msg400 date=1239735644]
What all does this kit hook up to??
[/quote]

The kit cost alot but, well worth it. The kit only comes with all the wiring to to start your engine and the use of the electronic transmission hook up. No lightning is used.

 

[twoll86]

is there enough wiring to mount it in the spar tire location to hide it ?

 

[modularf]

[quote author=twoll86 link=topic=215.msg432#msg432 date=1240009767]
is there enough wiring to mount it in the spar tire location to hide it ?
[/quote]

Oh yes, there is plenty of wire to mount it there...

 

[so_r_crazy]

Few questions-

What is the ICM?

So if all this does is run the engine, how is everything else run- lights, AC, p/w, p/l, etc. etc. Do you just leave all the other stock wiring?

Do they include instructions on how to merge the new wiring with the existing power items?

 

[modularf]

[quote author=so_r_crazy link=topic=215.msg444#msg444 date=1240337762]
Few questions-

What is the ICM?

So if all this does is run the engine, how is everything else run- lights, AC, p/w, p/l, etc. etc. Do you just leave all the other stock wiring?

Do they include instructions on how to merge the new wiring with the existing power items?
[/quote]

I believe they also make an accessories wiring kit. The only one I purchased was all the wires coming out of the CPU to start the car. Our Project is more of a Drag Car than on the street so not too concerned about that. We are leaving the other harness in and just cutting off the wires we don't need.

 

[modularf]

[quote author=so_r_crazy link=topic=215.msg444#msg444 date=1240337762]
Few questions-

What is the ICM?

[/quote]

Sorry about need to fix that... ICM is the IGNITION CONTROL MODULE:

 

[kweb288]

Does the icm come with the kit?

 

[modularf]

[quote author=kweb288 link=topic=215.msg1014#msg1014 date=1287964236]
Does the icm come with the kit?
[/quote]

No we went to the junkyard and found one.