modularf
Well-Known Member
On the '03/'04 Cobras, only the cylinders on the passenger's side head have an outlet for coolant to exit from the head. The coolant that exits goes on to the heater core. There have been numerous failures reported of the rear two pistons on the driver's side (cylinders #7 and #8) on modified Cobra's. One of the most viable theories for these failures is related to the lack of an exit for coolant on the driver's side head. This theory is that coolant more or less gets stuck in a pocket at the back of the driver's side cylinder head and this causes localized overheating at the #7 and #8 cylinders. A probable cure for this problem is to modify the cooling system so that coolant can exit the driver's side cylinder head and join the coolant flow leaving the passenger side head on it's way to the heater core and then on to the radiator.
Nice Write Up..
http://www.socalterminators.com/ldc/index.html
Nice Write Up..
http://www.socalterminators.com/ldc/index.html