Speedtospare
Well-Known Member
Anyone running this combo? What rim backspacing are you using?
Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
im running 17x9 in front and 17x10 out back, with 20mm offset in front and 25mm on back
yes sir 4 lug rear end, cant run the quad shocks though they must go bye byestock fox rear?
10.5's will stick out on a foxbody. You can go bigger it will require a minitub lol.
The housings are identical the axle shafts are 3/4 inch longer but yes either way they are hanging out
10.5's with 315's will NOT hang out past the fender (assuming you meant they would hang out passed the flared portion of the rear quarter/wheel well) using a fox housing with ranger 5 lug axles. I plan on running 17x9 FR500's with 245's in the front and 17x10.5's with 315's out back.
I have seen people running 10.5 and they all look like there trying to fit too much tire in an area that doesn't fit. I see it and think 80's chevrolet monte carlo's and mullet's.