So.... 315's stick out about an inch and rub on my set up. I do have a couple hundred lbs of custom audio in it too.... stance looks like crap, .... like a old 70's camaro that needs Joe dirt driving since I had to raise the back with weight jacker adj lowers and the front lowered 3/4 already. I have the 94-04 fr500's (10.5") on SN95 length axles because I actually put ABS on the car so I needed the exciter rings. If I had a +44 offset they would probably fit as I still have about an 1/2" of space on the inside between the quad and tire. Problem is that I cant find a FR500 10.5" with that offset in a 17".
So, after all that my question is.... am I correct in going to the 05+ 18x10 with the 40mm, to get them tucked back in? Then, since I have the SN95 spindles and 13" brakes, whats the right offset for the front . I would prefer not to go 18"s in front if necessary since I just bought the 17" wheel/tire combo fr500 and have brand new tires already.
So, after all that my question is.... am I correct in going to the 05+ 18x10 with the 40mm, to get them tucked back in? Then, since I have the SN95 spindles and 13" brakes, whats the right offset for the front . I would prefer not to go 18"s in front if necessary since I just bought the 17" wheel/tire combo fr500 and have brand new tires already.