• Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

04 Cobra Swap into my 87 GT Build

Very cool, looks great too. If you could just get a picture of the steering shaft clearance and possibly measure one of the tubes coming from the headers whenever you get a chance if possible I would be forever grateful. I would probably go with the smallest diameter (1 5/8) they sell anyway just to be safe, but if a larger size fits it would be great to know.

Also to another topic, how/did you mount the back seats in the hatch and do they latch or just sit there?
 
Nice. They are really close to the pan, but you can put a heat shield in and some extra cooling and it shouldn't be a problem. Really nice pics.
 
For some reason i am not getting notifications when people respond. I have been super busy, but have made some more car progress, here are some pics below...

Stanghunter said:
Looks great!! Kooks makes some nice headers!
Click to expand...
Thanks! yea i love them so far

Bill said:
Nice. They are really close to the pan, but you can put a heat shield in and some extra cooling and it shouldn't be a problem. Really nice pics.
Click to expand...

Good thought, i will have to do that

2manytoyz said:
Sweet build , what cams are you using ?
Click to expand...

Thanks!, Comp Stage 2 Cams


Here are some progress pics, Painted the hood, interior to match, fitting the SN95 Door panels, OEM fox back seat before recovering to match front seats, cleaned the cobra seats and Leatherique'd them, Fuel pump, diff cover, Willwood brakes and 13" rotors all the way around (will be selling my cobra ones and Baer EradiSpeed Rotors) and a couple other wiring odds and ends
IMG_7404_zpse3rgpjoa.jpg
IMG_7650_zpsgz4bmkey.jpg

IMG_7649_zpsjlzz4rxg.jpg
IMG_7430_zpss8ietun9.jpg
IMG_7416_zpsjliswzli.jpg
IMG_7315_zps0smvfqt1.jpg
IMG_7292_zpsol0hiixn.jpg
IMG_7304_zpshs64uwtb.jpg
IMG_7299_zpswbv6hdaf.jpg
IMG_7169_zps5re8lw8u.jpg
IMG_7172_zpsnipmywua.jpg
IMG_7206_zpsa3b7cc2s.jpg
IMG_7225_zpsia2dymfj.jpg
IMG_7125_zpstanmuluf.jpg
IMG_7124_zps2bmkw3cw.jpg
 
cpearson1342 said:
Very cool, looks great too. If you could just get a picture of the steering shaft clearance and possibly measure one of the tubes coming from the headers whenever you get a chance if possible I would be forever grateful. I would probably go with the smallest diameter (1 5/8) they sell anyway just to be safe, but if a larger size fits it would be great to know.

Also to another topic, how/did you mount the back seats in the hatch and do they latch or just sit there?
Click to expand...

I will try to get some pics and measurements for you, I am just using my factory back seats and ordering TMI Cobra style back seats to match the cobra fronts, and a couple other things too to set off the interior
 
Here are a couple pics of the steering shaft and headers, it's real tight, but does not hit or vibrate


df92fda45638a0275ab9d7d487c37463.jpg
060c18b284aab06d66eff1393cf3a9ca.jpg





Sent from my iPhone using Tapatalk
 
That donor car hurt to look at. Very nice project. I'll be starting on my own Termi swap very soon.
 
Awesome build. What all did you have to do to get that dash into the fox. I have a 98 cobra dash i want to put into my 90 lx. Thanks for any info.
 
You must log in or register to reply here.
Back
Top