93 Coupe/96 Cobra Project

[Rick]

Sounds great. Congratulations. Where did you end up getting to hydra boost?

 

[OrangeCrushFox]

Found one local from a guy that was parting out a GT. I would say this build has been a true "junkyard build" lol.

 

[ifran81]

Congrats on the build.. looks awesome

 

[OrangeCrushFox]

5 lug conversion in progress. Hood and bumper installed.

 

[ifran81]

Hey,

How did you get the stock fox cluster to work with your swap? Any help will be appreciated.

Thanks

 

[OrangeCrushFox]

Fox body wiring harness for the whole inside of the car, and then a 96 Cobra for the motor. On the fox side, it has a plug that goes to the water temp, oil pressure, and brake. Plugs into the same place as before on the hydroboost.

On the expansion tank, I just took the old fox body plug that went to the overflow tank and cut it spliced it into the expansion tank plug. That's for the low coolant light.

I haven't gotten the low oil light done yet.

The tach is an orange/white wire from the PCM that I just ran to the tach on the fox cluster.

The speedo comes a company that makes a box that converts the mechanical to the SN95 speedo. I can't remember what the company is called. I need to google search that soon.

 

[ifran81]

Thank you very much for the help.

 

[ifran81]

@OrangeCrushFox did you use the throttle cable from the donor car?

Thanks in advance

 

[OrangeCrushFox]

I used one from a 96 Cobra.

 

[OrangeCrushFox]

Wheel and tire test fit. These came off a 95 Cobra we own, so I'll need to buy another set.

Pypes Violater exhaust completed

 

[OrangeCrushFox]

Exhaust clip:

 

[Josh L]

Awesome build. Thanks for the info in the thread.

 

[OrangeCrushFox]

Wheel and tire combo test fit. Think I am going to go with the 10th Annys.... just need to find a set now that someone wants to sell.

 

[Bill]

Both look good (maybe not at the same time)

 

[OrangeCrushFox]

I pulled the 10th Anny from my Cobra, and the Bullitts from my 2v. Think I'm going to go with the 10th Anny.

 

[whiteponygt]

I vote 10th anniversary

 

[OrangeCrushFox]

 

[dondo84svo]

Question - I am using the fox rack. When I tried to install the steering shaft, but it's a bit short. What steering shaft should I be using?

Also got the K-Member in, but I forgot to get pictures of that.

what fuel lines did you use?

 

[OrangeCrushFox]

what fuel lines did you use?

Stock fox lines.

 

[nathan pfeifer]

Did you just bent the fox fuel lines? Any issues doing that?