• Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

VSS and cruise control

Black01bullitt

Active Member
I've been using a 4r70 in my swap for years running the stock PCM. I have a 2003 cruise control module in the car and the cruise worked great. I had a dakota digital ecd-100 controlling the stock fox speedo. The cruise and the ecd-100 were hooked up to the pcm output. I now have Holley EFI and trying to use the speedo output from it which is a 8000ppm signal. Cruise stopped working and the speedo moves with the tach until you are moving. I'm going back to the cable driven VSS like a fox would originally had. My question is can I hook the sensor signal wire straight to the cruise module or does it need to go thru something like the dakota digital SGI-100bt to convert it.
 
Top