Terminator Fox Awakens!

[bgraiders323]

You have to change the fittings if you want to retain the factory AC components that go along with the 4.6 4valve engine.

Oh I see hmmmmm thanx.

 

[419forest]

Evaporator re-installed.

 

[419forest]

On to the next step...fuel system

 

[bgraiders323]

Nice!!! Stock injectors? What pumps?Stock size fuel line?

 

[419forest]

Nice!!! Stock injectors? What pumps?Stock size fuel line?

10 AN fuel lines with dual feed; no crossover. 8 AN return fuel line with 80 LB injectors, Aeromotive A1000 fuel pump with controller.

 

[mustangcrazybj]

Wow buddy this is an awesome build sir

 

[419forest]

Wow buddy this is an awesome build sir

thank you.

 

[Speedtospare]

A1000 pump is noisy as hell. If you ever get sick of the noise they make a foxbody gas tank that allows triple pumps like the cobra tank.

 

[419forest]

A1000 pump is noisy as hell. If you ever get sick of the noise they make a foxbody gas tank that allows triple pumps like the cobra tank.

The A1000 is noisy if you don't run a speed flow controller. What you typically hear as noise comes from a non-speed controlled A1000 running at full speed at times you're not at wot.

 

[Speedtospare]

Had one with the controller. If your cars making decent HP and the car requires fue, its noisy. A1000 runs too hot for the street without the controller. Had a few that heat up and loosened the epoxy that held the magnets in place. I was never fond of having that pump is plain site.where i placed it or the sumped tank.

Just trying to give some insight.

 

[419forest]

Had one with the controller. If your cars making decent HP and the car requires fue, its noisy. A1000 runs too hot for the street without the controller. Had a few that heat up and loosened the epoxy that held the magnets in place. I was never fond of having that pump is plain site.where i placed it or the sumped tank.

Just trying to give some insight.

Ok.

 

[bgraiders323]

Just use the cobra fuel tank, it bolts right up, just gotta figure out the fill tube

 

[419forest]

Just use the cobra fuel tank, it bolts right up, just gotta figure out the fill tube

Too complicated. Have a great setup with sump tank on car and have had no negative issues. Capable of supporting over 800horsepower in a boost application.

 

[419forest]

Finished the fuel system today; return-style. On to the next task. Gotta get it done for the tuner in April.

 

[bgraiders323]

Wow looks badass! Got any pics of the rest of the fuel system?

 

[419forest]

Wow looks badass! Got any pics of the rest of the fuel system?

Sorry, but no other pics. I just tied back into the bulkhead under the hood which is fed from my previously-built fuel system from the tank forward.

 

[whiteponygt]

this Its An Awesome Build Just CurioUs Whats The Budget On This Build.

 

[419forest]

this Its An Awesome Build Just CurioUs Whats The Budget On This Build.

I don't have a budget. My goal is to build a high quality conversion.

One can buy a high mileage terminator drivetrain, conversion parts and install with own labor for $10k. This does not include any upgraded parts.

 

[419forest]

Looks like I will be relocating the AC drier for lack of room...

 

[Bill]

The good news is, you can mount it almost anywhere by just customizing the hoses and adapting a bracket.